“This is not a guilty verdict, nor is it a suspension of any other canonical punishment,” Canary wrote. Suspensions are obtained by various methods of dispersion and condensation. Suspension most often means an interruption or restriction of something, especially temporary, as in The Parade requires a temporary suspension of traffic. In cars and some other vehicles, the suspension (or suspension system) is the collective system (of parts such as springs and shock absorbers) that supports the body of the vehicle and is designed to reduce the amount of irregularities transmitted from the wheels to the rest of the vehicle. In music, suspension refers to delaying the end of a note in one chord so that it moves to the next chord. Definition name, plural: suspensions (1) (biochemistry) State in which the particles of a substance are dispersed but not completely dissolved in a liquid; the substance in that state. (2) (general) The act or condition of a temporary interruption; an interruption. Food supplement A suspension contains particles that are mixed by stirring and dispersed in the liquid. If allowed to settle, the particles can be seen on the ground. Some medications are available as an oral suspension. Therefore, these drugs should be taken by first shaking the vial with the suspension. Compare: Mixtures can be classified according to their properties. A suspension is a type of mixture.
Barcelona will not have Arturo Vidal or Sergio Busquets due to suspension, and I think Ousmane Dembélé could still recover from an injury. Multiple light scattering combined with vertical scanning is the most widely used technique to monitor the dispersion state of a product and thus identify and quantify destabilization phenomena.     It works with concentrated dispersions without dilution. When light is sent through the sample, it is scattered by the particles. The intensity of the backscatter is directly proportional to the size and volume of the dispersed phase. Therefore, changes in local concentration (sedimentation) and changes in overall size (flocculation, aggregation) are detected and monitored. The value of the zeta potential of particulate suspended solids is of paramount importance in the analysis of the stability of particle suspensions. This parameter indicates the extent of electrostatic repulsion of interparticles and is usually analyzed to determine how the use of adsorbates and pH modification affect particle rejection and suspension stabilization or destabilization. An example of suspension would be sand in the water. Suspended particles are visible under a microscope and settle over time if they are not disturbed.
This distinguishes a suspension from a colloid, in which the colloidal particles are smaller and do not settle.  Colloids and suspensions are different from solutions in which the dissolved substance (solute) is not present in solid and solvent form and the solute are mixed homogeneously. The sedimentation instability of the suspensions leads in practice to a gradual disturbance of the uniform composition before the complete deposition of the insoluble phase. The suspension is closer to insolubility in the solubility continuum. At the other end of the solubility continuum is the solution, where the particles are completely mixed and no solid phase is observed. The solubility continuum is usually organized in order: insolubility, sedimentation, suspension, colloid, and solution. A suspension of liquid droplets or fine solid particles in a gas is called an aerosol. In the atmosphere, suspended solids are called particles and consist of particles and particles of soot, sea salt, biogenic and volcanic sulfates, nitrates and cloud droplets.
In chemistry, a suspension is a heterogeneous mixture of liquid and solid particles. To be a suspension, the particles must not dissolve in the liquid. If the settled particles stick together under the influence of molecular cohesion forces and form aggregates, then there is an aggregate instability of the suspensions. Thus, unstable sedimentation suspensions may be stable or unstable in terms of sedimentation. A suspension is a heterogeneous mixture in which dissolved particles are deposited out of a solvent-like phase at some point after their introduction. We use the terms “solvent” and “solvent” because we are dealing with a heterogeneous mixture, while the terms solute and solvent refer to homogeneous solutions. Next, the scientists directed short pulses of low-intensity ultrasound on this suspension. In retrospect, however, he believes that the suspension “had a positive effect on the fraternal community.” Example 1 Sometimes in the right light you can see dust particles floating in a room. Eventually, the dust will settle on the floor and on the furniture, and the room will need to be cleaned. Dust in the air is a suspension.
Essentially, they placed a series of solar panels in the form of a suspension bridge over the elevator. A characteristic property of suspensions is their optical inhomogeneity, which is expressed in turbidity. Turbidity is an integral external sign of the suspension and is determined by the presence of insoluble particles impermeable to light. The degree of turbidity of the suspensions is different. It is determined by the concentration of the suspended phase and the degree of its dispersion (particle size). In 1850, a suspension bridge in Angers gave way when 487 soldiers stepped on it and 226 were killed. Suspension is the noun form of the verb suspend. The most common and general meanings of hanging are to hang something by attaching it to something else, to make it stop, to immobilize it or to postpone it. Most suspension meanings are based in one way or another on these suspension meanings.
Stable suspensions can form with very small solid particles (particle size less than 1 μm). Fine particles are held in suspension by molecular motion. The particles separate very slowly or not at all from the liquid. These solids are called colloids. A suspension is a heterogeneous mixture of a solid finely distributed in a liquid. The solid is not dissolved in the liquid, as is the case with a mixture of salt and water. Automatic misconduct of the game, blocking of 5 games and maximum fine for combat. t.co/BM4QeBAkzC One of the most important features of suspensions is their sedimentation instability. It is manifested by the inevitable sedimentation of suspended solids under the influence of gravity. The particles can settle on their own without sticking together. In this case, there is an aggregated stability of the suspension.
Several parents spoke of kindergarten suspensions that lasted for years with their children. When we left Conway, we crossed the suspension bridge and paid a good toll for this privilege. There are also suspensions that have the ability to remain in a suspended state for a long time. They are called stable suspensions. Some suspension bridges collapsed as a result of vibrations caused by the bodies of men walking together. In the context of chemistry, a suspension is a particle that hangs only in a liquid, undissolved. (When the suspension is left alone, the particles eventually settle on the ground.) The difference between a suspension and a colloid is that the solid particles of a suspension settle over time. In other words, the particles in a suspension are large enough to allow sedimentation. Individual suspension particles are present in a colloid, where light is scattered and reflected in what is known as the Tyndall effect. A suspension contains larger particles than in a colloid.
In a colloid, the particles remain mixed over time. This second meaning is the basis for the most common use of suspension – a temporary interruption. In chemistry, suspension most often refers to a liquid or other substance in which solid particles are mixed but not dissolved – muddy water is a basic example. A suspension of liquid or solid particles in a gas is called an aerosol. Example 2 If you go to the beach and mix sand and water in a bucket, you form a suspension. Over time, the sand settles to the bottom of the bucket to leave clear water. Sometimes the coagulating suspensions form large flakes, which are poorly wet by the dispersion medium and float on the surface. This phenomenon is called flocculation. This suspension, Masters said, was imposed on ARNN by dial Global`s lawsuit.
“Shoutout to Galloway for repaving jimmie Leeds` road, my car`s suspension thanks you” The suspensions are unstable from a thermodynamic point of view, but can be kinetically stable over a longer period of time, which in turn can determine the durability of a suspension. This time frame must be measured in order to provide the consumer with accurate information and ensure the best product quality. In 2017, the law was amended to stipulate that it would allow “the temporary suspension of telecommunications services.” In the modern chemical process industry, high-shear mixing technology has been used to produce many innovative suspensions. We use the word “suspension” when the particles are large enough to finally settle. If the particles are too small to settle, they are said to form a colloid. A suspension is a heterogeneous mixture in which the dissolved particles do not dissolve, but are suspended throughout the volume of the solvent and float freely in the medium.  The internal phase (solid) is dispersed by mechanical agitation using certain excipients or suspendants throughout the external phase (liquid). .